Seajet Bioclean Eco Tie coat, Red, 2,5 liter

€ 105,27 € 87,00
Levertijd:

Seajet Tie Coat and Seajet Bioclean Eco form a silicone based, foul-release system. Fouling finds the ultra slippy surface difficult to adhere to and detaches during the use of the boat. For boats with max speed of 40 knots (mph). 10 m²/liter

Informatie

Seajet Seajet Bioclean Eco Tie-Coat SEAJET BIOCLEAN ECO TIE-COAT is developed for SEAJET BIOCLEAN ECO system. It ensures maximum adhesion and performance. It can be used over existing antifouling including Teflon based antifouling. Quick drying. Preceding coat to SEAJET BIOCLEAN ECO.

Omschrijving van Seajet Seajet

Bioclean Eco Tie-Coat It ensures maximum adhesion and performance. It can be used over existing antifouling including Teflon based antifouling. Quick drying.

Voornaamste kenmerken van Seajet

Seajet Bioclean Eco Tie-Coat Gekleurde laag die voor kleur eindlaag zorgt iomdat eindlagen 2 x blank zijn Optimaal aangroeiwerend Sneldrogend Altijd in minimaal twee lagen rollen Onderwaterproduct Seajet

Seajet Bioclean Eco Tie-Coat is te gebruiken in een systeem:

met Eerste afhankelijk van ondergrond 2 tot 3 lagen Seajet 117 of Seatet 015 Daarna 2 lagen Seajet Bioclean Eco Tie-Coat Als laatste 2 lagen Seajet Bioclean Eco

Kleur en glansgraad Seajet Bioclean Eco Tie-Coat White, black, navy blue, red. N.v.t.

Instructies voor gebruik Seajet Bioclean Eco Tie-Coat Over existing clean antifouling:

roughen the surface with abrasive paper P100-120 grade (wet sanding). Wash down with fresh water and let it dry. Apply 2 coats of SEAJET TIE COAT to assure good adhesion with subsequent SEAJET BIOCLEAN ECO. Only apply to dry, damp-free surfaces. Bare fibreglass: degrease and abrade with P100-120 grade abrasive paper, followed by THINNER E wiping to remove all contamination from the surface. First apply 2 coats of SEAJET 117 Silver. Then aply 2 coats of SEAJET TIE COAT followed by SEAJET BIOCLEAN ECO (2 coats). Wood: degrease if required and abrade followed by final cleaning to remove all contamination from the surface. First apply 1 coat of SEAJET 015. Then apply 2 coats of SEAJET TIE COAT followed by SEAJET BIOCLEAN ECO (2 coats). Steel: degrease if required and abrade followed by final cleaning to remove all contamination from the surface. First apply 3 coats of SEAJET 117 Silver. Then apply 2 coats of SEAJET TIE COAT followed by SEAJET BIOCLEAN ECO (2 coats). Aluminium: as for steel but apply 3 coats of SEAJET 117 Silver. Then apply 2 coats of SEAJET TIE COAT followed by SEAJET BIOCLEAN ECO (2 coats).

Droogtijden Seajet Bioclean Eco Tie-Coat

Overschilderbaar met zichzelf na 3 uur bij 20°C. Overschilderbaar alleen met zichzelf en Seajet Bioclean Eco Verdunning voor Seajet Bioclean Eco Tie-Coat Seajet Thinner A Verwerkingstemperatuur Seajet Bioclean Eco Tie-Coat Niet verwerken onder 5°C.

Rendement (m2 per liter)

Seajet Bioclean Eco Tie-Coat Ca. 7,5 m2 per liter voor een droge laagdikte van 40 µm. Ondergrond Seajet Bioclean Eco Tie-Coat Zie instructie voor gebruik, voor alle ondergronden geschikt mits juiste lagen vooraf aangebracht.

Applicatiemethode (wijze van aanbrengen)

Verspuiten/verkwasten/rollen Boven of onder de waterlijn Alleen onder de waterlijn

Meer informatie
Artikelnummer 2022007-2-1-1-1-2-1
Schrijf uw eigen review
U plaatst een review over:Seajet Bioclean Eco Tie coat, Red, 2,5 liter