Epifanes Epoxy Primer, white, set of 4 liters

Two component anticorrosive primer based on epoxy resin and zinc phosphate. Rust, good filling and easy to sand. application: Filling base coat in a two-component system (adhesive), wood, fiberglass, or as anti-corrosion primer in a two component system on steel and aluminum, inside and outside, above and below the water line. Paintable with all Epifanes two-component products (Epifanes Poly-urethane primer and topcoat above the water line, Epifanes Epoxy HB Interim Coat Coat or below the waterline). Sanding: After 12 hours at 20 ° C. Brush Application: Epifanes Thinner D-601 Spray Processing: Epifanes Thinner D-601 drying time: After 12 hours at 18 ° C. Within 5 days without sanding Pot life at 20 ° C: For 2 hours at 18 ° C. Recoat: After 12 hours at 18 ° C. Recoat with: Epifanes Poly-urethane spar varnish Epifanes Epoxy HB Coat Interim Epifanes Epifanes Epoxy Coat Fillers Mileage: 12 m2 / l @ 40 micron Recommended dry film thickness: 40 micron Recommended wet layer thickness: 80 microns Mixing ratio in volume: 100 parts of base (A): 25 parts hardener (B) Mix ratio by weight: 100 parts of base (A): 14 parts hardener (B)