Jotun Safeguard Universal, 20 liters red
€204.09
€168.67
Delivery time:
Jotun Safeguard Universal (20 liters)
product description
Jotun Safeguard Universal is a two-component polyamide curing vinyl epoxy-based coating. Specially developed as a bonding layer between the epoxy primer and antifouling systems. Can be used as an adhesive layer for a wide range of topcoats. To be used as an adhesive layer and submerged in atmospheric environments. Suitable on approved primers on aluminum, carbon steel, full bath hot-dip galvanized steel and stainless steel substrates. It can be applied at temperatures below zero surface area.
typical use
general
Suitable as an adhesion layer for a wide variety of Jotun antifouling products.
navy
External fields, especially designed for outdoor side hull, can be used in accommodations, decks and other exterior areas.
Protective
Suitable as an adhesion layer in a complete system exposed to a wide range of corrosive conditions to very high and submerged. Recommended for offshore environments, including splash zones, water cooling inlets, cooling pipes, risers, and bridges.
Colors
gray, red
application methods
spray
Use airless spray.
Brush
Recommended for stripe coating and small areas. Care must be to achieve the specified dry film thickness.
Thinner / Cleaning agent
Dilution: Jotun Thinner No. 17
Drying and curing time at 15 degrees
Dust dry: 4 hours
Foot traffic drying time: 15 hours
Recoat: 15 hours
Dry for use: 4 days
Dry immersion: 30 hours
Article number | J043 |
---|---|
Brand | Jotun |
Write Your Own Review